Kicker KMA600.6 600 Watt 6 Channel Marine Amplifier

The Kicker KMA600.6 is a versatile amp that can be used to power 6 speakers or you can bridge chanel 5-6 and make it an affordable yet powerful 5 channel marine amp.

• 6 or 5 Channel Amplifier - This is a 6 channel marine amplifier, but Kicker setup the signal processing so that it can perform well as a 5 channel amplifier by bridging channels 5 & 6. Channels 5 & 6 have a high-pass, low-pass, or all-pass filter switch and it can be set between 50-200Hz. In addition, there is a fixed subsonic filter for channels 5 & 6 at 25 Hz that can be turned on or off. If you are running a subwoofer, turn the subsonic filter on. If not, keep it off.
• 750 Watts of Dynamic Power - The KMA600.6 is rated at 50W x 6 RMS but will actually put out close to 750 watts in a real world, listening to music environment.
• Class D Circuitry - Class D circuitry is popular for marine applications becuase it is very efficient and consumes less current from your charging system. Less current draw means that you can play your stereo for a longer time while the engines are not running. In addition, it also means less heat which lessens the chances of thermal shut-off on those super hot summer days.
• Power Up to 12 Speakers - This amp is 2 ohm stable, allowing you to wire two, 4-ohm speakers to each output channel. This means you can have a single amplifier powering up to 12 speakers on your boat.\
• Selectable Input Switches - You can run this amplifier with only 2 channel of input. There's no need for additional RCAs or jumpers. You can turn the input switches for AMP2 and AMP3 to OFF and the amplifier will use the signal from 2 channels for all 6 channels of output.